Inter enabled electricity meter

This project requires constructing a power meter, capturing the meter reading and sending it over the internet. To make meter readings you can use ADE7751. To get measurements out of the meter you can use the pulse output provided on the IC for interfacing stepper motor. Each pulse shows a particular amount of usage. You can use a counter program to count the number of pulses and can calculate the usage form that.ADE7751 provides a pulse output. The rate of pulse is propotional to the Power used. The rate of operation is 100pulses per KWH. So u can calibarate the reading easily. So directly connect this pulse output to 8051(as an interrupt or an input( using any ports)). If u use interrupt programming thats better and easy. Process the inputs accordingly and display the results in an LCD. There are many types of LCds available in market

Tags :
Your rating: None Average: 3.7 (3 votes)