Projects

ENGINES HEAT TRANSFER BY FREON BOTH ELECTRICAL AND MECHANICAL ASSISTANTS

You are not Member of this Project.
Project Owner : Vinoth B 3
Created Date : Fri, 21/11/2014 - 12:18
Project Description :
The purpose of cooling system is to keep the engine at its most efficient operating temperature at all speeds, and under all operating conditions. During combustion of the air-fuel mixture inside the engine the temperature as high as 220ºC may reached, this level may also increases when the engine speed increases. If there is no provision of any cooling systems the inside temperature heavily affects the cylinder wall, heads, piston and piston rings etc. To minimize this fact every automobile engines comes with cooling system they either natural or artificial. Most the two wheelers comes with air cooling method and four wheelers comes with artificial cooling method sometimes high range two wheelers may also comes with artificial one. Using both methods we will reduce the temperature but it is not sufficient when the atmospheric temperature exceeds more than the normal level. In this situation there is a need of an alternative method. Engine’s cooling with refrigerant may solve that fact because it is slightly depends upon the atmospheric temperature than remaining methods of cooling. So we ever get a better result from refrigerant cooling.
 
You are not authorized to access this content.
You are not authorized to access this content.
You are not authorized to access this content.
You are not authorized to access this content.
You are not authorized to access this content.